NOTA:
Antes de manipular el interior del equipo, lea la información de seguridad que se envía con el equipo y siga los
pasos en
Antes de manipular el interior del
aparecen en
Después de manipular el interior del
recomendadas, consulte la página principal de cumplimiento de normativas en www.dell.com/regulatory_compliance.
Temas:
•
Procedure
•
Post-requisites
Procedure
CAUTION:
To avoid damage to the wireless card, do not place any cables under it.
1. Align the notch on the wireless card with the tab on the wireless-card slot and slide the card into the slot.
2. Align the screw hole on the wireless card with the screw hole on the system board.
3. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card supported by your computer.
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
4. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and the system board.
5. Replace the screw that secures the wireless-card bracket and the wireless card to the system board.
Colocación de la tarjeta inalámbrica
equipo. Después de manipular el interior del equipo, siga las instrucciones que
equipo. Para obtener información adicional sobre prácticas de seguridad
Antenna-cable color
white
black
Colocación de la tarjeta inalámbrica
14
29