Colocación del ensamblaje de la pantalla
NOTA:
Antes de manipular el interior del equipo, lea la información de seguridad que se envía con el equipo y siga los
pasos en
Antes de manipular el interior del
aparecen en
Después de manipular el interior del
recomendadas, consulte la página principal de cumplimiento de normativas en www.dell.com/regulatory_compliance.
Temas:
•
Procedure
•
Post-requisites
Procedure
1. Slide and place the palm rest and keyboard assembly on the display assembly.
2. Using the alignment posts, press the display hinges down on the palm rest and keyboard assembly.
3. Align the screw holes on the display hinges with the screw holes on the palm rest and keyboard assembly.
4. Replace the screws that secure the display hinges to the palm rest and keyboard assembly.
5. Route the display cable through the routing guides on the palm rest and keyboard assembly.
6. Adhere the tape that secures the display cable to the palm rest and keyboard assembly.
7. Slide the display cable to the connector on the system board and close the latch to secure the cable.
Post-requisites
1. Replace the
wireless
card.
2. Replace the battery.
3. Replace the
base
cover.
4. Replace the
optical
drive.
52
Colocación del ensamblaje de la pantalla
equipo. Después de manipular el interior del equipo, siga las instrucciones que
equipo. Para obtener información adicional sobre prácticas de seguridad
28