Display Of Selected Functions; Operation Mode - Carrier 42ADF025 Manual Del Usuario

42ADF025, 42ADF035

Display of Selected Functions

1. Heating (heat pump models only)
• Ventilation (fan only)
• Heating (heat pump models only)
• Automatic (heat pump models only)
• Cooling and dehumidification
• Dehumidification only
2. Signal transmission symbol
3. Temperature selected
4. Address selected
5. Temperature unit of measurement (°C or °F)
6. Unit configuration
Table II: Unit protection device
Type of protection
Indoor coil high temperature
protection
Indoor coil freeze up
protection
Discharge gas high
temperature protection
Defrost cycle
Against frequent compressor
cycling
WARNING:
During heat pump operation the unit will undergo several defrost cycles to remove ice that might collect on the outdoor unit in very
low ambient temperatures. In these cycles, fan speed will automatically stop, can not be varied until defrost cycle is completed.
All manuals and user guides at all-guides.com
Effect of protection
Compressor speed slow down
or off
Compressor speed slow down
or off
Compressor speed slow down
or off
Indoor fan off
Against frequent compressor
cycling
7. Batteries exausted indicator
8. Louvre positioning (Flap)
9. Fan speed
10. Powerful mode
11. Economical mode
12. ON timer selected
13. Night timer active
14. DAILY timer active (Everyday)
15. ON timer and OFF timer or current time
16. OFF timer selected

Operation mode

Heating and Auto mode
Cooling, Dry and Auto mode
Cooling, Heating, Dry and
Auto mode
Heating and Auto mode
Cooling, Heating, Dry and
Auto mode
GB
E N G L I S H
When on
During unit operation at high
ambient
During unit operation at low
ambient
During unit operation at high
ambient
During unit operation at low
and humid ambient
During unit operation
9