System Controls; Power Status Leds - NEC L3H Manual Del Usuario

All manuals and user guides at all-guides.com

System Controls

System Controls System Controls
System Controls System Controls
The Versa notebook uses status lights marked with icons to communicate
power status and operating status.

Power Status LEDs

Power Status LEDs Power Status LEDs Power Status LEDs Power Status LEDs
Power Status LEDs indi-
cate your Versa's current
power status.
Power Status LED
(A)
- Lights green when the
system power is on.
- Blinks green when the
system is in Standby
mode.
- Lights yellow (blinks
when in Standby
mode) to indicate that
battery power is at 8%
capacity or less.
- Lights amber (blinks
when in Standby mode) to indicate that battery power is at 3% capacity or
less.
Battery Charging LED (B)
- Lights amber when the primary battery is charging. Blinks amber to indi-
cate an error. The primary battery is installed in the battery bay.
- Lights green when the secondary battery is charging. Blinks green to indi-
cate an error. The secondary (optional) battery is housed in the Modular Bay
slot.
Operating Status LEDs Operating Status LEDs Operating Status LEDs
Operating Status LEDs Operating Status LEDs
Operating status LEDs keep you informed of your Versa's current operating
status.
Email Notification LED (C) - some systems have an LED that lights when
new email is received.
Hard Drive Access (D) - lights when the Versa accesses the hard disk drive,
or a drive installed in the VersaBay IV.
18
Copyright©2001 NEC Computers International BV