Trouble Shooting Guide - NEC L3H Manual Del Usuario

All manuals and user guides at all-guides.com
LCD screen is dark and blank.
Power saving mode has shut off the backlight. Press a keyboard key.
The built-in LCD may not be selected. Press Fn-F3 once or twice to
select the LCD video mode.
Screen brightness or contrast needs adjustment. Use the Fn-F8 / Fn-F9
function keys.
The system entered Save-To-File (Windows NT) or Hibernation
(Windows 98/2000) mode due to low battery power. Plug in the AC adapter
or replace the battery pack, and then press the power button to resume
operation.
Battery power does not last long.
Use power-saving modes.
Fully discharge and charge the battery one time to recondition it.
Replace the battery.
Information on the LCD is difficult to see.
Adjust the brightness control. Use the Fn-F8 and Fn-F9 function keys.
The power button does not resume the system.
If the system does not resume, it may have automatically entered Save-
To-File (Windows NT) or Hibernation (Windows 98/2000) mode due
to low battery power. Attach the AC adapter and try again.
The system does not automatically enter Standby mode.
A disk drive might be busy. Wait until the disk drive stops and try again.Check
that Auto Play is disabled. See "Changing the Auto Play Setting" for details in
the electronic guide.
Problems at System Startup Problems at System Startup Problems at System Startup Problems at System Startup Problems at System Startup
The system displays an invalid configuration error message at power on when
there are the following conditions:
the current configuration information doesn't match configuration infor-
mation stored in Auto Setup, such as when an internal option is added.
the system loses configuration information.
If either condition is true, the system displays an "invalid configuration infor-
mation" message.
Copyright©2001 NEC Computers International BV
T T T T T roub rouble Shooting Guide roub roub le Shooting Guide le Shooting Guide le Shooting Guide
roub le Shooting Guide
25