Getting Started; Positioning The Lcd Tv; Using The Tilt Stand; Removing The Tv Tilt Stand - Sanyo CLT1554 Manual Del Propietário

POSITIONING THE LCD TV

Always use an appropriate table or stand when posi-
tioning your TV. Allow enough space to tilt the TV.
For best viewing, avoid locating the TV where direct
sunlight or indoor lighting will fall on the screen.
Note: CLT1554 measurements are in the parenthe-
sis. All dimensions are in millimeters (mm).
USING THE DETACHABLE TV TILT
STAND
To change the viewing angle of your
LCD TV, position your hand on the
top and hold the stand firmly, then tilt
the LCD screen forward or backward.
CAUTION: Do not position hand
under the screen while tilting the TV
forward.
Note: Maximum tilt is 5º to the front
and 10º to the back.

REMOVING THE TV TILT STAND

Tools Needed: Phillips screwdriver
Important Note: Position TV face down on a pad-
ded or cushioned surface to protect the screen and
finish.
1
Remove the screw from the stand back cover.
2
Remove four (4) screws from the metal bracket.
CAUTION: Hold the stand firmly as you remove
the last screw.
Carefully remove the TV stand.
3
All manuals and user guides at all-guides.com

GETTING STARTED

1
Need help?
Visit our Web site at

POWER CONNECTION

Insert AC Adaptor into the DC input terminal on
the TV.
2
Insert AC power cord into Adaptor; then insert
the plug fully into a 120V, 60Hz, AC power
outlet.
BACK OF TV DC
POWER INPUT
TERMINAL
POWER OUTLET
(HOUSEHOLD)
Warning: This 12V AC/DC product is
intended for indoor home use only. It
is not to be exposed to high outdoor ambient
temperatures found in automotive, marine, and
aviation environments.
1
2
www.sanyoctv.com
AC
ADAPTOR
1
2
AC CORD
1-800-877-5032
or Call
5