Audio Input Jacks; Connecting A Dvd Player - Sanyo CLT1554 Manual Del Propietário

USING THE COMPONENT AUDIO/VIDEO INPUT JACKS
CONNECTING A DVD PLAYER OR OTHER EQUIPMENT
Switch off TV and external equipment before con-
necting cables. (Cables are not supplied.)
1
Connect a DVD Player or other equipment's
Component Video Out to the TV Component
Video In (Y-Pb-Pr) Jacks.
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you
must run All Channel Search twice before
you can select the AV inputs.
What you will need
for connections:
1
Component Video
Cable – 1
2
Audio Cable – 1
REMOTE CONTROL
4
I
A solid Blue screen with COMPONENT3 displayed means
that the Video mode is selected, but no signal is being
detected at the Component jacks. Check connection, and
turn on external equipment.
8
Need help?
Visit our Web site at
All manuals and user guides at all-guides.com
3
www.sanyoctv.com
2
Connect the DVD Player's Audio Out to the TV
Component L/R Jacks.
3
Press POWER to turn on the TV. Turn on external
equipment also.
4
Press the INPUT key to select COMPONENT3.
TV BACK
TV COMPONENT3
I
Press the INPUT key after connecting cables to access
the A/V Inputs. There is NO need to tune to a blank
channel.
1-800-877-5032
or Call
1
DVD PLAYER
JACKS
2