How Does My Landroid L Know Where To Go; Finding The Charging Base; Rain Sensors; Sensing The Boundary Wire - Worx WG795E Manual Del Usuario

3.2 How does my Landroid
®
Your Landroid L is capable of doing things on its own. The
®
Landroid L knows when it needs to go to its Charging Base (3) to
charge, can sense when it is raining, can stop itself if it senses a
problem, and knows to stop and turn around when it bumps into
something blocking its path, such as a person, pet, or other object.
®
The Landroid L will also automatically stop its Blade Turning Disc (16)
from rotating if it is lifted off the ground to prevent an accident.
A. Finding the charging base
When your Landroid
follow the Boundary Wire (23) in an anti-clockwise motion back to its
Charging Base. To save energy, the Landroid
its Blade Disc when returning to its Charging Base.
B. Rain sensors
®
The Landroid L has a Rain Sensor (12) at its rear that will sense
rain drops and tell the Landroid
Boundary Wire back to its Charging Base (See Fig. B).
®
The Landroid L is programmable to have a delay start function (0 –
180 mins) when it rains. When the rain sensors are wet, the Landroid
returns to its docking station. Only when the rain sensors become
dry will the Landroid
mowing immediately. If you want to command your Landroid
ahead and start mowing again before the time you have set under
the "Rain start delay" function, then press the Access Button (8), dry
®
the Landroid L off, and close the Keypad Window (9) to tell it to mow
again (See Fig. D, E). See the Programming and Troubleshooting
Guide for more details.
C. Sensing the boundary wire
10
®
The Landroid L always obeys the border set by the Boundary Wire
and uses two sensors at its front to sense when it is getting close. (See Fig. C) Before changing direction, the Landroid
will overrun the Boundary Wire around 25cm*.
*This is the recommended distance, because the Landroid
gauge to ensure proper installation.
D. Starting and stopping while mowing
If you would like to command the Landroid
mower. When pressed, the Landroid
mowing again until you have closed its Keypad Window (See Fig. D, E).
D
Lawn Mowing Robot
All manuals and user guides at all-guides.com
®
L needs to recharge, it will stop mowing and
®
L chooses not to rotate
®
L to stop mowing and follow the
®
L begin the delay start countdown or return to
®
L to stop mowing, then simply press the Access Button (8) on top of the
®
L will open its Keypad Window and await your further commands. It will not begin
®
L know where to go?
B
®
L
®
L to go
C
®
L cannot calculate the distance itself. Use the provided distance
E
®
L
EN