Mode Selection; Master/Slave Mode - Cameo PAR 64 CAN Manual De Usuario

MODE SELECTION:

Programmes
STATIC COLOUR MODE:
Press the MODE button repeatedly if necessary to select the Static Colour Mode. Press the
UP and DOWN buttons to select one of the 7 desired colours.
CL1 = Red, CL2 = Green, CL3 = Blue, CL4 = Yellow, CL5 = Cyan, CL6 = Purple, CL7 =
White (CL0 = blackout).
COLOUR JUMPING MODE
Press the MODE button repeatedly if necessary to select the Colour Jumping Mode. Press the
UP and DOWN buttons to select the colour jumping speed from J01 - J99.
COLOUR FADING MODE
Press the MODE button repeatedly if necessary to select the Colour Fading Mode. Press
the UP and DOWN buttons to select the fading speed from F01 -F99.
AUTO MODE
Press the MODE button repeatedly if necessary to select the Auto Mode. The unit changes
between Colour Jumping Mode and Colour Fading Mode automatically. The colour jumping
and fading speed can be preadjusted by using the speed settings of the Colour Jumping
and Colour Fading Modes.
SOUND ACTIVE MODE
Press the MODE button repeatedly if necessary to select the Sound Control Mode. The
unit will follow the beat of the music thanks to the built in microphone. Press the UP and
DOWN buttons to adjust the sensitivity of the microphone (S00 = least sensitiv / S31 =
most sensitiv).

MASTER/SLAVE MODE

Press the MODE button repeatedly if necessary to enter the Slave Mode.
Link slave units and the master unit (exclusively standalone modes) via DMX cables. The
slave unit will follow in sequence with the master unit.
8