Safety Device - Winkhaus panicLock AP4 Instrucciones De Montaje

Installation, Operating and
Maintenance Instructions

3.1.3 Safety device

There are basically no concerns about the function of the locking systems
against securing doors in escape routes with the entryguards (e.g. for alarm trig-
gering in the event of unauthorised use) listed below.
The panic locking system according to EN 1125 must be secured with the GfS-
entryguard with insertion part for panic bars.
- GFS-entryguard, EN 179 one-handed version
Manufacturer:
- Entryguard DENI Exit 2.3100100
Manufacturer:
There are no concerns about the use of the surveillance contacts listed below.
Manufacturer:
Art.-no. Products
5061128 T-VERRIEGELUNGS-KONTAKT
VSK VDS AP4 0,2M
5070006 T-RSK MV / UMV MT VDS-C
4M GR
5067305 T-HT RSK SMART II 6M KAB +
MA + BS SW / SL
The safety devices are not to be regarded as part of the emergency exit locks
according to EN 179: 2008. In case of doubt, the suitability must be proven se-
parately.
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
panicLock AP4
GfS Gesellschaft für Sicherungstechnik mbH
Tempowerkring 15
D-21079 Hamburg (Germany)
Niederhoff & Dellenbusch GmbH & Co. KG
Nordring 26-30
D-42579 Heiligenhaus (Germany)
Aug. Winkhaus GmbH & Co. KG
Berkeser Str. 6
D-98617 Meiningen-Dreißigacker (Germany)
suitable for lock
usable, retrofittable with 1 + 2 sash
doors, active and inactive panicLock
AP4 locks
suitable for single sash doors
(NOT for inactive locks "UTE")
25 5062179
EN
3