Makita GA7020 Manual De Instrucciones página 12

Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K): 1.5 m/s
Model GA7021
Work mode: surface grinding with normal side grip
Vibration emission (a
h,AG
Uncertainty (K): 1.5 m/s
Work mode: surface grinding with anti vibration side
grip
Vibration emission (a
h,AG
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K): 1.5 m/s
Model GA9020, GA9020S
Work mode: surface grinding
Vibration emission (a
h,AG
Uncertainty (K): 1.5 m/s
Work mode: disc sanding
Vibration emission (a
h,DS
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for main
applications of the power tool. However if the power
tool is used for other applications, the vibration
emission value may be different.
WARNING:
• The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of exposure in
the actual conditions of use (taking account of all parts
of the operating cycle such as the times when the tool
is switched off and when it is running idle in addition to
the trigger time).
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA7020, GA7020S, GA7021, GA9020,
GA9020S
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
12
All manuals and user guides at all-guides.com
2
): 2.5 m/s
2
2
): 5.0 m/s
2
2
): 4.5 m/s
2
2
): 2.5 m/s or less
2
2
): 5.5 m/s
2
2
): 2.5 m/s or less
2
ENG902-1
ENH101-16
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30. 1. 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN