Speaker Connection - Teac AI-301DA Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

V
PRECAUTIONS before connection
o Connect the power cord's plug to the wall
outlet only after all other connections are
complete.
o Read the instructions of each device that
you intend to use with this unit.
12

Speaker Connection

Caution
o Check the impedance of your speakers.
o The red speaker terminals are positive (+)
o Generally, the + wire of the speaker cable is
o The metal portions of the two separate
o Be sure to insert each plug securely. To pre-
Connect speakers with an impedance of
between 4 ohms and 8 ohms.
and the black speaker terminals are nega-
tive (–).
marked to distinguish it from the – wire of
the cable. Connect the marked wire to the
red + terminal and the unmarked wire to
the black – terminal.
wires should not touch. If they touch an
electrical short might occur. Shorted wires
can create a fire hazard or cause equipment
failure.
vent hum and noise, avoid bundling the
cables together with the AC power cord or
other cables.

Publicidad

Tabla de contenido
loading

Tabla de contenido