English; Functional Buttons - LIMIT 500 Manual De Instrucciones

• Before using the Meter inspect the case. Do not use the Meter if it
is damaged or the case (or part of the case) is removed. Look for
cracks or missing plastics. Pay attention to the insulation around
the connectors.
• Inspect the test leads for damages insulation or exposed metal.
Check the test leads for continuity.
• Do not apply more than the rated voltage, as marked on the
Meter, between the terminals or between any terminal and the
grounding.
• The rotary switch should be placed in the right position and no
any changeover of range shall be made during measurement is
conducted to prevent damage of the Meter.
• When the Meter working at an effective voltage over 60V in DC or
42V rms in AC, special care should be taken for there is danger of
electric shock.
• Do not use or store the Meter in an environment of high tempera-
ture; humidity, explosive, inflammable and strong magnetic fields.
The performance of the Meter may deteriorate after dampened.
• When using the test leads, keep your fingers behind the finger guards.
• Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, diodes and current.
• Before measuring current, check the Meter fuses and turn off
power to circuit before connecting the Meter to the circuit.
• Replace the battery as soon as the battery indicator appears. Whit
to low battery, the Meter might produce false readings that can
lead to electric shock and personal injury.

Functional buttons

Hold
Blue
• ON/OFF switch.
• ON/OFF for hold function.
• H shows on the display when value is hold.
7

English