Technical Data - DeWalt DWE349 Traducido De Las Instrucciones Originales

JIGSAW
DWE349
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Power input
Frequency
No‑load speed
Stroke length
Bevel angle adjustment
Weight
Cutting depth in:
wood
aluminum
steel (non‑alloy)
Noise values and vibration values (triax vector sum) according to EN62841‑2‑11:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Cutting boards
Vibration emission value a
h,B
Uncertainty K =
Cutting sheet metal
Vibration emission value a
h,M
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
WALT one of the
e
V
AC
W
Hz
/min 500–3200
mm
l/r
kg
mm
mm
mm
dB(A)
dB(A)
dB(A)
= m/s 2
2
m/s
2
= m/s
m/s 2
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC‑Declaration of Conformity
Machinery Directive
DWE349
230
1
650
Jigsaw
50 DWE349
WALT declares that these products described under Technical
D
e
Data are in compliance with:
20
2006/42/EC, EN62841‑1:2015, EN62841‑2‑11: 2016.
0‑45°
These products also comply with Directive 2014/30/EU and
2.4
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
85
The undersigned is responsible for compilation of the technical
20 file and makes this declaration on behalf of D
10
89
100 Markus Rompel
Vice‑President Engineering, PTE‑Europe
5
WALT, Richard‑Klinger‑Straße 11,
D
e
65510, Idstein, Germany
24.05.2020
5.6
1.5
8.2
1.5
EngLIsh
WALT at
e
WALT.
e
17