Technical Data; Definitions: Safety Guidelines - DeWalt DCS781 Traducido De Las Instrucciones Originales

EnGLIsH
MITRE SAW
DCS781
You have chosen a D WALT tool. Years of experience, thorough product development and
e
innovation make D WALT one of the most reliable partners for professional power tool users.
e

Technical Data

Voltage
Type
Battery type
Blade diameter
Blade bore
Blade body thickness
Max. kerf thickness
Max. blade speed
Max. cross‑cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross‑cut 45°
Mitre (max. positions)
Bevel (max. positions)
0 ° mitre
Resulting width at baseboard max. height 165mm
Resulting width at max height 112 mm
Resulting height at max width 310 mm
45 ° mitre left
Resulting width at max. height 112mm
Resulting height at max. width 219mm
45 ° mitre right
Resulting width at max. height 112mm
Resulting height at max. width 219mm
45 ° bevel left
Resulting width at max. height 60 mm
Resulting height at max. width 310 mm
45 ° bevel right
Resulting width at max. height 50mm
Resulting height at max. width 310 mm
Automatic blade brake time
Wireless tool control transmitter
Frequency band
Max. power (EIRP)
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841‑3‑9:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this information sheet has been measured
in accordance with a standardised test given in EN62841 and may be used to compare one
tool with another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level represents the main
applications of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or noise emission may differ. This
may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should also take
into account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration
and/or noise such as: maintain the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
32
EC‑Declaration of Conformity
Machinery Directive and Radio Equipment Directive
DCS781
V 54
Mitre Saw
DC
20
DCS781
Li‑Ion
D WALT declares that these products described under Technical Data are in compliance with:
e
mm 305
2006/42/EC, EN62841‑1:2015 +AC:2015; EN62841‑3‑9:2020 + A11:2020.
mm 30
These products also comply with Directive, 2014/53/EU; 2014/30/EU and 2011/65/EU. For
mm 1.6 more information, please contact D
the manual.
mm 2.2
The undersigned is responsible for compilation of the technical file and makes this declaration
min ‑1 3800
on behalf of D
e
mm 310
mm 219
mm 112
mm 50
Markus Rompel
left 50°
Vice President of Engineering, PTE‑Europe
right 60°
D WALT, Richard‑Klinger‑Straße 11,
e
left 49°
65510, Idstein, Germany
right 49°
29.04.2022
mm 19
mm 278 THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS 2008 AND
mm 90
mm 197
mm 90
Mitre Saw
DCS781
mm 197
D WALT declares that these products described under "technical data" are in compliance with:
mm 90
e
The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597 (as amended),
EN62841‑1:2015 +AC:2015; EN62841‑3‑9:2020 + A11:2020.
mm 278
These products conform to the following UK Regulations
mm 54
Radio Equipment Regulation 2017, S.I.2017/1206 (as amended)
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091 (as amended).
mm 296
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
mm 40
Equipment Regulations 2012, S.I. 2012/3032 (as amended).
s <5
For more information, please contact D
the manual.
The undersigned is responsible for compilation of the technical file and makes this declaration
MHz 433
on behalf of D
mW 0.03 e
kg 23.2
dB(A) 94.4
dB(A) 106.4
Karl Evans
dB(A) 2.5
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
SL1 4DX
England
29.04.2022
WARNING: To reduce the risk of injury, read the instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
WALT at the following address or refer to the back of
e
WALT.
DECLARATION OF CONFORMITY
RADIO EQUIPMENT REGULATION 2017
WALT at the following address or refer to the back of
e
WALT.