Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EngLIsh
•
Health hazards caused by breathing dust developed when
sawing wood, especially oak, beech and MDF.
•
Risk of personal injury due to flying particles.
•
Risk of burns due to accessories becoming hot
during operation.
•
Risk of personal injury due to prolonged use.
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
i
Your D
WALT tool is double insulated in accordance
e
with EN62841; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced only by
WALT or an authorised service organisation.
D
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
•
Safely dispose of the old plug.
•
Connect the brown lead t o the live terminal in the plug.
•
Connect the blue lead to the neutral terminal.
WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Package Contents
The package contains:
1 Jigsaw
1 Jig saw blade
1 Anti‑scratch shoe cover
1 Instruction manual
•
Check for damage to the tool, parts or accessories which may
have occurred during transport.
•
Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection.
20
Date Code Position (Fig. A)
The date code
11
is printed into the housing.
Example:
Description (Fig. A)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Lock‑on button
2
Saw blade locking lever
3
Saw blade
4
Anti‑scratch shoe cover
5
Shoe
6
Shoe beveling lever
7
Speed control dial
8
Pendulum stroke selector
9
Blade holder
10
Intended Use
Your jig saw has been designed for professional
sawing applications. Your D
been designed for sawing wood, plastics, metal, rubber and
ceramic plates
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
These jigsaws are professional power tools.
DO nOt let children come into contact with the tool.
; the
2
Supervision is required when inexperienced operators use
this tool.
•
Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injury.
Blade Installation (Fig. B)
WARNING: When mounting the saw blade wear
protective gloves. danger of injury when touching the
saw blade.
WARNING: Use only T type blades. Using blades other
than T type blades cause insufficient tightening of the
blade, resulting in a serious personal injury.
, which also includes the year of manufacture,
2021 XX XX
Year and Week of Manufacture
WALT jig saw, DWE349, has
e
Publicidad
Tabla de contenido
