Carrier XCT 7 40VH015A-7G-QEE Manual De Operación E Instalación página 26

Installing Heat Reclaim Ventilation
Installation Diagram
1. Outlet Grille---Available on the Site
2. Service Lid (dia.450mm)
3. Service Space for Maintaining Heat Exchange
Device, Air Screen, Control Box and Fan.
4. Air Hose (available on the site)
5. Inlet Grille (available on the site)
6. Air Hose or duct (available on the site)
7. EA (exhaust air)
8. Heat Insulant-available on the site
<Air Hose Installation Essentials>
• Silencing box and soft hose are recommended when installing the unit in quiet places.
• Airflow volume and noise rating shall be considered for special places when choosing installing material.
• Temperature inside ceiling rises when outdoor air enters ceiling; therefore, heat insulation properties shall
be delivered to metal parts.
9. OA (outdoor air: fresh outdoor air)
10. Suspending Rack to Reduce Vibration (available
on the site)
11. Suspending Bolt (available on the site)
12. SA (sending air)
13. Service Lid (dia.450mm) (available on the site)
14. RA (return air)
15. Dome Shield (available on the site)
18
Obliquity Above