Steam Ironing; Cleaning; Descaling - TREVIDEA g3ferrari STIROPIU' Manual Del Usuario

• It is recommended ironing clothes that require low temperatures first and then medium and high
temperatures. This operation allows to save time since ironing plate heats faster than it cools down.
• In the case of blend fabric(Ex: Acrylic and cotton), it is recommended to select the temperature according
to the fabric that requires the lowest.
• When you do not know the composition, it is recommended to iron a non-visible part of the it, starting from
the lowest temperature to find the most suitable temperature.
• Sometimes the clothing becomes shiny, in this case you need to iron it on the inside not to ruin it. When
ironing at maximum temperature (MAX), it is recommended to place a cloth between the ironing plate and
the fabric.
Setting the temperature
1) Place the iron on the insulated rubber housing above the boiler.
2) Plug the system to the electrical outlet.
3) Select the temperature regulator (D) according to the symbols shown on page 7. The chosen symbol has
to be aligned with the mark placed on the body of the iron. The iron plate temperature control light,
placed on the side of the iron, shows that the iron plate is warming up. Wait for the light to turn off to
start ironing.
Caution: While ironing, the control light lights up periodically indicating that the temperature is constant. If
you lower the thermostat, do not start ironing until the iron temperature control light turns off.

STEAM IRONING

Before using the steam, check the water level first.
At this point you can use the jet steam by pushing the button (A).
It's possible to use the vertical jet of steam; pressing the steam button (A) periodically allows to freshen up
curtains, hanging clothes, etc ...
Caution: to avoid the dripping of water, it is recommended to only use steam at high temperatures.

CLEANING

Before cleaning any part of the product, ensure that the unit is unplugged from the electrical outlet, the
ironing plate is not hot and that the boiler is turned off.
Any leftovers on the ironing plate can be removed with a damp cloth or with a non-abrasive detergents. Do
not scrape the ironing plate with iron sponge or metal objects.
The plastic parts can be cleaned with a damp cloth and neutral detergent, then wiped with a dry cloth.
Do not immerse the unit in water.
DESCALING OPERATION
NEVER REMOVE the plastic cap (L) if the unit is still hot or when it has been used recently.
CAUTION: rinse the boiler once a month, or every 10 uses, to avoid damages due to limestone.
In this way, the limestone inside the boiler will not settle on the walls. Descale once or twice a month to
keep the equipment in good condition.
LABEL FABRIC
Synthetic
(Acrylic, nylon...)
silk – wool
cotton – linen
TEMPERATURE
·
Low temperature
··
Medium temperature
···
High temperature
Do not iron
15