Spotify Connect - Lenco DIR-270WD Manual De Usuario

program 2, press the 'Program' (17) button to select, and be taken to choose your next
programmed song. On the display, the song number will show as 001 for CD song number 1, 008
for CD song number 8, 010 for CD song number 10 etc.
4. After you have finished program song selection, press the 'Play/Pause' (3) button to play the songs
which have been programmed.
Press "Stop" button to exit the "Program" when programming.
When the Program playback is activated, press "Eject" or "Stop" button twice, then it will exit the
program playback mode.

Spotify Connect

With spotify connect you can play spotify music directly on your Lenco DIR-270.
Note: to use this functionality you should have a spotify premium account
Press the 'Home' button (5) and turning the Navigation/OK (8) wheel to the Spotify Connect function,
and confirm by pressing the Navigation/OK (8) wheel.
If you are using the remote control, press 'Home' button (6) and press the Navigation right(12) or
Navigation left(4) to select Spotify Connect function and confirm by pressing the OK/Pause (3).
Listen out loud with Spotify Connect
1. if not already connected, Connect your device (DIR-270WD) to your home Wi-Fi network (refer to
Network configuration)
2. Open up the Spotify app on your phone, tablet or laptop using the same wifi network
3. Play a song and select for Devices Available.
4. Select your device (DIR-270WD) and start listening.
Note: your DIR-270 can be in the standby state to use Spotify connect. When the DIR-270WD is
selected from the spotify app, it will wake up automatically. But you have to be sure it is
connected to the same wifi network as your smartphone/tablet or laptop.
25