Human Touch ht 410 Manual Del Usuario página 8

take
When changing backrest or foot and calf massager direction, there is a slight pause while the chair gears
shift. This is perfectly normal.
To collapse the chair for moving, press down on the backrest release lever, located
on the back of the chair, then push the backrest down onto the chair seat.
humantouch.com
a seat
8
1. Power on
Plug the power cord into a grounded 120-volt
power source. Turn the master power switch (on
the bottom center of the backrest) to On.
2. Adjust the footrest height
While sitting in the chair, pull up on the
footrest lever (located on the right-hand
side of the chair) to raise the footrest to a
comfortable height. Release the handle.
3. Adjust the backrest
Use the remote control Recline and
Incline settings to adjust the backrest
angle for maximum comfort.