Sauder 410367 Manual Del Usuario página 6

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM DOWEL
Cam Dowel Cam Dowel
Arrow
Metal end
Hidden Cam Hidden Cam
3.
Caution Caution
Risk of damage or Risk of damage or
injury. HIDDEN CAMS injury. HIDDEN CAMS
must be completely must be completely
tightened. HIDDEN tightened. HIDDEN
CAMS that are not CAMS that are not
completely tightened completely tightened
may loosen, and parts may loosen, and parts
may separate. To may separate. To
completely tighten: completely tighten:
Page 6
1.
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Start Start
Arrow Arrow
2.
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Hole Hole
Tighten Tighten
Maximum Maximum
210 degrees 210 degrees
Minimum Minimum
190 degrees 190 degrees
Arrow Arrow