Sauder 410367 Manual Del Usuario página 8

Step 3
Slide the UPPER END MOLDINGS* (K) onto the notched
å
edges of the UPPER ENDS (A3 and B3).
NOTE: The bottom edges of the ENDS and MOLDINGS
å
should be even.
*U.S. Patent No. 5,499,886
å
Notched edge
Slide the END MOLDINGS (K)
onto the notched edges.
Page 8
Notched edge
A3
B3
K
The large groove is
closer to this edge.
These edges should be even.
The large groove is
closer to this edge.
K