BGS technic 70003 Manual De Instrucciones página 2

Connectors MC3 / MC4 / Tyco, 4 pcs.
CONTENS
1 Quick Change Ratchet Crimper
2 Pair of jaws (IQ1)
for MC3 solar connectors, cable sizes DIN 2.5 / 4 / 6 mm² (AWG 14 / 12 / 10)
3 Pair of jaws (IQ2)
for MC4 Solar Connectors, cable sizes DIN 2.5 / 4 / 6 mm² (AWG 14 / 12 / 10)
4 Pair of jaws (IQ3),
for Tyco Solar Connectors, cable sizes DIN 1.5 / 2.5 / 4 / 6 mm² (AWG 15-10)
INTENDED USE
This tool set is used for crimping of solar connectors MC3, MC4 and Tyco.
MC3
IMPORTANT NOTES
•
Do not use the crimping pliers if parts of the crimping pliers are damaged or missing.
•
Do not allow children to play with the tool set or its package.
•
Before mounting the terminals into the connector housing, make sure that the pins are properly
crimped and the wire has a good electrical connection to the terminal.
•
Do not use the tool set for applications for which has been not designed.
CHANGING PAIR OF JAWS
Push the required pair of jaws into the
pliers from the front.
Decisive for the selection is which
connector is used.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Crimping Pliers Set, for Solar
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
MC4
BGS 70003
Tyco
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed