Asus RT-N15 SuperSpeed N Guia De Inicio Rapido página 11

RT-N15 Wireless Router Quick Start Guide
PPTP user
If you are using PPTP services, select ADSL
connection that requires username,
password and IP address. Fill in the
username, password and IP address provided
by your ISP into the fields. Click Next to
continue.
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select ADSL
or other connection type that uses static
IP address. Input the IP address, subnet
mask, and default gateway provided by your
ISP. You can specify DNS servers, or get
DNS information automatically.
3. To set up your wireless interface, specify
an SSID (Service Set Identifier), which
is a unique identifier attached to packets
sent over WLAN. This identifier emulates
a password when a device attempts to
communicate with your wireless router via
WLAN.
If you want to protect transmitted data, select a Security Level to enable encryption methods.
Medium: Only users with the same WEP key settings can connect to your wireless router
and transmit data using 64bits or 128bits WEP key encryption.
High: Only users with the same WPA pre-shared key settings can connect to your wireless
router and transmit data using TKIP encryption.
10