Protecting The Environment; Technical Data; Ec Declaration Of Conformity - Stanley FATMAX FMC607 Traducido De Las Instrucciones Originales

Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
u
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com

Technical data

Voltage V
DC
No-load speed Min
Max. torque Nm
Chuck capacity mm
Max Drilling capacity
Steel/wood mm
Charger
Input Voltage
Output Voltage
Current
Approx. charge time
Battery
FMC689L
Voltage V
18
DC
Capacity Ah 1.5
Type Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L ) 74 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 85 dB(A), uncertainty (K) 5 dB(A)
WA
FMC607 H2
0-450/0-2000
-1
905998**
typ. 1
V
230
AC
V
18
DC
A 1
90 - 240
min
FMC687L FMC688L
18
2.0
Li-Ion
(Original instructions)
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a
The Supply of Machinery (Safety)
Stanley Fat Max declares that these products described under
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact Stanley Fat Max at the
The undersigned is responsible for compilation of the techni-
18
declaration on behalf of Stanley Fat Max.
55
13
13/38
906086**
typ. 1

EC declaration of conformity

230
18
2
45 - 120
18
Stanley Fat Max declares that these products described under
4.0
"technical data" are in compliance with:
Li-Ion
2006/42/EC, EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products also comply with directives
) 1.8 m/s , uncertainty (K) 1.5 m/s
2
h, D
Declaration of conformity
Regulations 2008
Cordless Drill - FMC607
"technical data" are in
compliance with:
2008/1597 (as amended).
S.I.2016/1091 (as amended).
2012/3032 (as amended).
following address or refer to
the back of the manual.
cal file and makes this
Vice President Professional Power Tools
Stanley Fat Max UK, 270 Bath Road, Slough
%
MACHINERY DIRECTIVE
Cordless Drill - FMC607
2014/30/EU, and 2011/65/EU.
ENGLISH
2
Karl Evans
Berkshire, SL1 4DX
United Kingdom
30/12/2021
9