Protecting The Environment; Technical Data - Stanley FAT MAX KFMCD628 Traducido De Las Instrucciones Originales

ENGLISH
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries accord-
ing to local provisions. Further information is available at
www.2helpU.com.

Technical data

Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood
Weight
Charger
Input voltage V
AC
Output voltage V
DC
Current mA
Approx. charge time Mins
FMC685L
Battery
Voltage
V 18
AC
1.5
Capacity
Ah
Li-Ion
Type
10
(Original instructions)
KFMCD628 H2
V
DC
0-430/0-1700
-1
Min
Nm
mm
mm
kg
905998** 906086
230 230
18 18
1000 2000
80-240 40-120
FMC687L FMC684L
18 18
2.0 1.3
Li-Ion Li-Ion
Level of sound pressure according to EN 62841:
Sound pressure (L
Sound power (L
Vibration total values (triax vector sum) according to EN 62841:
Drilling into metal (a
Impact drilling into concrete (a
Declaration of conformity
The Supply of Machinery (Safety)
Stanley Fat Max declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
18V
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
55
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
13
13/35
1.5
906364**
230
20
1000
80-240
) 93.5 dB(A), uncertainty (K) 5 dB(A)
pA
) 104.5 dB(A), uncertainty (K) 5 dB(A)
WA
2
) 1.4 m/s , uncertainty (K) 1.5 m/s
h, D
2
) 11.3 m/s , uncertainty (K) 1.5m/s
h.ID
Regulations 2008
KFMCD628 - Impact Drill
2008/1597 (as amended).
S.I.2016/1091 (as amended).
2012/3032 (as amended).
Stanley Fat Max.
Vice President Professional Power Tools
Stanley Fat Max UK, 270 Bath Road, Slough
Berkshire, SL1 4DX
2
2
Karl Evans
United Kingdom
30/09/2021