Enabling Pxe On A Gb Ethernet Daughter Card - Dell PowerEdge 1855 Guía De Configuración

All manuals and user guides at all-guides.com

Enabling PXE on a Gb Ethernet Daughter Card

To enable PXE on a server module's Gb-Ethernet daughter card, locate the Intel IBAUtil utility
(version 3.04.04.00 or later). This utility is available as part of the DOS utilities for network
adapters available at support.dell.com. Follow the directions provided in the utility package to
enable PXE.
NOTE:
If PXE is enabled, the default connection is port LOM 1.
24
General System Configuration