Installation Instructions - Carrier XCT 7 40VA003D7FAQEE Manual Del Usuario

Installation Instructions

Do not install at such places
1. A place that is filled with mineral oil, such as a kitchen that contains oil and steam everywhere, may cause
degradation
2. A place containing corrosive gases such as sulphurous acid gas will cause corrosion of the copper tube, welding
joint, etc., causing refrigerant leakage.
3. A place where machines emit electromagnetic waves will lead to abnormality and improper functioning of the control
system.
4. A place with possible leakage of combustible gases, floating of carbon fibre and combustible dust, and the use of
volatile combustible substances such as diluents may lead to fire.
5. A place where small animals inhabit, whose tend to contact with the inner electrical components, may cause faults,
smoking, outbreak of a fire, etc.
6. A coastal place with high salinity and a place with great variation in voltage, such as a factory, may cause faults to
vehicles and ships.
Attention item
Install after ensuring that the type of refrigerant used is R410A. If any other type of refrigerant is used, the machine will
not be able to run.
• Before and after unpacking, if a connection kit is to be moved, the hoisting handles (totally 4)
should be held firmly. Do not apply force to other parts, especially a refrigerant tube and an
electrical cabinet.
• Concerning the installation of the outdoor and indoor units, refer to the installation
specification of each unit.
Accessories
Confirm that the accessories below are packed together.
40VA003D7FAQEE,40VA005D7FAQEE,40VA010D7FAQEE,
Variable
diameter
Quantity 2
Ø6.35
Shape
Ø9.52
suspending clip screw
2 2 8 10
Thermal
Nut
insulation pipe
2 2
5
Specification
1