Declaration Of Conformity; Manufacturer's Warranty - STEINEL XLED CAM 1 Manual De Instrucciones

No access to the unit via the Steinel
CAM app.
– Wi­Fi router too far from unit.
• Use repeater.
– Wi­Fi connection interrupted (e.g.
by walls)
• Use repeater.
Smartphone/tablet cannot be con-
nected to the unit
– A unit is already configured.
• Carry out reset.
• Scan QR code from connected
end device.
No live image transmission.
– Unit too hot.
• Deactivate manual override.
• Let unit cool down.
9. Disposal
Electrical and electronic equipment,
accessories and packaging must be re­
cycled in an environmentally compatible
manner.
Do not dispose of electrical
and electronic equipment as
domestic waste.
EU countries only:
Under the current European Directive on
Waste Electrical and Electronic Equip­
ment and its implementation in national
law, electrical and electronic equipment
no longer suitable for use must be
collected separately and recycled in an
environmentally compatible manner.
10. Declaration of
Conformity
Hereby, STEINEL Vertrieb GmbH
declares that the radio equipment type
XLED CAM 1 is in compliance with
Directive 2014/53/EU. The full text of the
EU declaration of conformity is available
at the following internet address:
www.steinel.de
11. Manufacturer's
Warranty
This STEINEL product has been man­
ufactured with utmost care, tested for
proper operation and safety and then
subjected to random sample inspection.
STEINEL guarantees that it is in perfect
condition and proper working order.
The warranty period is 36 months and
starts on the date of sale to the con­
sumer. We will remedy defects caused
by material flaws or manufacturing
faults. The warranty will be met by repair
or replacement of defective parts at our
own discretion. The warranty shall not
cover damage to wear parts, damage or
defects caused by improper treatment
or maintenance. Further consequen­
tial damage to other objects shall be
excluded.
Claims under the warranty will only be
accepted if the unit is sent fully assem­
bled and well­packed with a brief de­
scription of the fault, a receipt or invoice
(date of purchase and dealer's stamp) to
the appropriate Service Centre.
21