Manufacturer's Warranty - STEINEL DL Vario Quattro S Manual Del Usuario

Detection reach table
Mounting height 2.5 m
Adjustment
radial
2.4 m × 2.4 m
1
2 3.2 m × 3.2 m
3 3.6 m × 3.6 m
4 4 m × 4 m
5 4.4 m × 4.4 m
6 5 m × 5 m
7 6 m × 6 m
6 m × 6 m
8
Mounting height 2.8 m
Adjustment
radial
1 3 m × 3 m
2 3.4 m × 3.4 m
3 3.8 m × 3.8 m
4 4.4 m × 4.4 m
5 5.4 m × 5.4 m
6 5.6 m × 5.6 m
7 6 m × 6 m
8 6 m × 6 m
Mounting height 3.0 m
Adjustment
radial
3.4 m × 3.4 m
1
2 3.6 m × 3.6 m
4 m × 4 m
3
4 4.8 m × 4.8 m
5 6 m × 6 m
6 6 m × 6 m
7 6 m × 6 m
6 m × 6 m
8
Mounting height 6.0 m
Adjustment
radial
5.7 m × 5.7 m
1
2 6 m × 6 m
3 6.7 m × 6.7 m
4 8 m × 8 m
5 10 m × 10 m
10 m × 10 m
6
7 10 m × 10 m
10 m × 10 m
8
tangential
4 m × 4 m
6 m × 6 m
7.3 m × 7.3 m
8.6 m × 8.6 m
10.2 m × 10.2 m
12.6 m × 12.6 m
15.7 m × 15.7 m
16 m × 16 m
tangential
5.4 m × 5.4 m
6.4 m × 6.4 m
7.5 m × 7.5 m
8.8 m × 8.8 m
10.4 m × 10.4 m
13.1 m × 13.1 m
17 m × 17 m
17.3 m × 17.3 m
tangential
6.2 m × 6.2 m
6.6 m × 6.6 m
7.7 m × 7.7 m
9 m × 9 m
10.6 m × 10.6 m
13.4 m × 13.4 m
17.9 m × 17.9 m
18.1 m × 18.1 m
tangential
11 m × 11 m
11.7 m × 11.7 m
13.6 m × 13.6 m
16 m × 16 m
18.7 m × 18.7 m
23.8 m × 23.8 m
31.7 m × 31.7 m
32 m × 32 m
- 14 -
7. Maintenance
The light can be cleaned with a damp cloth
( without detergents ) if dirty.
Important note: the control gear cannot be
replaced.
8. Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environmen-
tally compatible manner.
Do not dispose of electrical and electronic
equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste
Electrical and Electronic Equipment and its imple-
mentation in national law, electrical and electronic
equipment no longer suitable for use must be
collected separately and recycled in an environ-
mentally compatible manner.

9. Manufacturer's warranty

This Steinel product has been manufactured with
utmost care, tested for proper operation and safety
and then subjected to random sample inspection.
Steinel guarantees that it is in perfect condition
and proper working order. The warranty period is
36 months and starts on the date of sale to the
consumer. We will remedy defects caused by ma-
terial flaws or manufacturing faults. The warran-
ty will be met by repair or replacement of defec-
tive parts at our own discretion. The warranty shall
not cover damage to wear parts, damage or de-
fects caused by improper treatment or mainte-
nance. Further consequential damage to other ob-
jects shall be excluded.
Claims under the warranty will only be accepted
if the unit is sent fully assembled and well-packed
with a brief description of the fault, a receipt or
invoice ( date of purchase and dealer's stamp ) to
the appropriate Service Centre.