Remote Control Operation - aflamo ALBION AV-WM33ALB/WH Manual De Usuario

Remote Control Operation

BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
POWER
remote control. Turns off flame effect.
FLAME "-": Makes flame effect dimmer.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for heater to turn on.
FLAME
FLAME "+": Makes flame effect brighter.
NOTE: Flame effect stays on until
power button is turned off. Flame effect
must be on for heater to turn on.
FLAME
HEATER button: Turns heater on and off.
NOTE: The heater only works when the
flame effect is on. If the flame effect is off,
the heater will not turn on.
NOTE: To prevent overheating, the heater
HEATER
blows cool air for 10 seconds before the
heater turns on, and after it turns off.
FUNCTION
www.aflamo.pl/en/
P
ACTION & INDICATION
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off.
Power and all functions turn off.
3. Press once. Flame effect gets dimmer.
4. Press again until desired setting is
reached. Flame effect continues to
get dimmer each time button is
pressed.
3. Press once. Flame effect gets brighter.
4. Press again until desired setting is
reached. Flame effect continues to
get brighter each time button is
pressed.
1. Press once. Indicator lights up.
Fan blows cool air for 10 seconds. Low
heater turns on and blows warm air.
2. Press again. Indicator lights up.
High heater turns on and blows hot air.
3. Press again. Heaters turn off.
The fan blows cool air, then turns off.
10