Product Specification; Machine Elements; Noise/Vibration Information; Intended Use - Bosch GKS 55 Manual Del Usuario

All manuals and user guides at all-guides.com
EURO • Printed in Germany • BA 1 609 929 535 • GKS 55/65/66 CE • GB • OSW 11/99
GKS 55/65/66 CE - Buch Seite 12 Dienstag, 9. November 1999 3:57 15

Product Specification

Hand Circular Saw
Part number
Rated power
Output power
No-load speed
Speed under load, max.
Riving knife thickness, max.
Cutting depth at 90°, max.
Cutting depth at 45°, max.
Speed selection
Constant electronics
Overload protection
Starting current limiter
Base plate
Weight (without optional extras)
Safety class
Saw blade dia. (max.)
Saw blade dia. (min.)
Saw blade thickness (central part), max.
Tooth thickness, max.
Tooth thickness, min.
Mounting hole

Machine Elements

1 Spindle lock
2 Switch lock
3 On/Off switch
4 Handle
5 Speed selector thumbwheel (GKS 66 CE)
6 Cutting depth scale
7 Winged screw for cutting depth setting
8 Cutting angle scale
9 Winged screw for cutting angle setting
10 Auxiliary handle
11 Winged screw for parallel guide
12 Parallel guide
13 Swinging protective guard
14 Base plate
15 Riving knife attachment
16 Saw dust ejector
17 Allen key
18 Clamping bolt with washer
19 Clamping flange
20 Mounting flange
21 Riving knife
22 Motor spindle
23 Cutting mark, 0°
24 Cutting mark, 45°
Not all of the accessories illustrated or described are
included as standard delivery.
12
GKS 55 GKS 65
0 601 567 1.. 0 601 568 1..
1 200 W 1 200 W
760 W 760 W
4 100 RPM 4 100 RPM
2 800 RPM 2 800 RPM
1.9 mm 1.9 mm
55 mm 65 mm
36 mm 43 mm
– –
– –
– –
– –
358 x 151 mm 358 x 151 mm
4.7 kg 4.7 kg
/ II / II
170 mm 190 mm
159 mm 177 mm
1.8 mm 1.8 mm
2.9 mm 2.9 mm
2.0 mm 2.0 mm
30 mm 30 mm

Noise/Vibration Information

Measured values determined according to
EN 50 144.
The A-weighted noise levels of the machine are
typically: Sound pressure level: 90 dB (A); sound
power level: 103 dB (A).
Wear hearing protection!
The typical hand-arm vibration is below 2.5 m/s

Intended Use

GKS 55 / GKS 65
The machine is intended for lengthways and
crossways cutting of wood with straight cutting
lines as well as mitre angles to 45° while resting
firmly on the work piece.
GKS 66 CE
The machine is intended for lengthways and
crossways cutting of wood with straight cutting
lines as well as mitre angles to 45° while resting
firmly on the work piece. With suitable saw
blades, non-ferrous metal, light building materials
and plastic can also be sawed.
GB
GKS 66 CE
0 601 568 7..
1 600 W
940 W
1 800 - 4 100 RPM
3 700 RPM
1.9 mm
66 mm
43 mm
•
•
•
•
358 x 151 mm
4.8 kg
/ II
190 mm
177 mm
1.8 mm
2.9 mm
2.0 mm
30 mm
2
.