Radio Operation - Denver CRP-514 Instrucciones De Uso

All manuals and user guides at all-guides.com
6. The radio OFF mode, select the display light Auto Off / Low / High
dimmer (25) to the Auto off mode, the LCD display light will
automatically off in 15 seconds.
- Press any key button to turn the display light on.
RADIO OPERATION
- Press the On/Off button (12) to turn radio On.
- Select AM/FM band press the AM/FM band press the AM/FM band
button (8).
- Select the station using the Tuning Knob (17).
- Turn the volume knob (24) to adjust volume as required.
- Press the On/Off button (12) to turn radio off.
DST – Daylight saving time
Press >>/ Year / DST button (6) and hold for 3 seconds to toggle on
and off DST function.
Note :
- The AM band use an internal directional aerial, rotate the radio for
best reception.
- Ensure that the FM antenna (22) is completely unrolled and
extended for best FM reception.
Line in
The Line in jack can be used to playback alternate audio signal
sources
on the unit speakers.
This line in jack requires a 3.5mm audio cable for input signal.
Note : The 3.5mm audio cable is not included
Remark : Temperature range for indoor : 0 to +50°C or 32 to 122°F
RESET
- The reset button (15) is located on the back of unit. Use a ballpoint
pen to press it whenever you change the batteries, or unit is not
performing as expected. This will return all settings to default value,
and you will lose any stored data (alarm and clock settings).