Installation Procedure - Brother Innov-is KIT III Guia De Instalacion

Installation Procedure

The following procedure describes how to upgrade
your sewing machine to KIT
Note
• If the procedure described below is not fully
completed, your sewing machine cannot be
upgraded to KIT
• Access to the Internet is required in order to obtain a
Certification Key.
a
Make a note of the 10-digit number (internal
machine identification number) displayed
beside "No." on page 5 of the Settings screen.
Memo
• Make sure the internal machine identification
number (No.) is recorded accurately as these
numbers need to be entered within the Certification
Key Issuing Wizard in order to obtain the
Certification Key.
* The number of pages in the Settings screen may differ depending
on the version.
Note
• The internal machine identification number that
appears beside "No." is different from the machine
serial number (SER. NO.) located on the label
attached to the back of the sewing machine.
b
Insert the CD-ROM into the computer's CD-
ROM drive.
Memo
• In Windows 7 or Windows Vista, when the AutoPlay
dialog box appears, click Open folder to view files.
4
All manuals and user guides at all-guides.com
III
.
III
.
Internal
machine
identification
number (No.)
Version
number
c
Open the designated drive for your CD-ROM
(usually the "D" drive) on the computer (My
Computer), double-click
Certification Key Issuing Wizard.
Memo
• The following procedure can be used to start the
Certification Key Issuing Wizard.
1. Click Start.
2. Click Run or in the search box, type run, and
then, in the list of results, click Run.
→ The
Run
dialog box appears.
3. Type the path to the application file
(D:\KeyWizard_Kit3.exe), and then click OK.
→ The Select Language dialog box automatically
appears.
d
Select the desired language, and then click
OK.
→ KIT III
Certification Key Issuing Wizard appears.
e
Carefully read the information that appears,
and then click Next.
to start the