Maintenance; Grease Filter; Carbon Filter; Attention - Electrolux EFT 600-2 Libro De Instrucciones

Maintenance

Before performing any
maintenance operation,
disconnect the hood from
the electricity.

Grease filter

This serves to hold the grease particles in sus-
pension. The metal filter should be washed every
month with warm soapy water or, if possible, in
the dishwasher (60°C).
Remove the filter:
Open the latch and rotate the grid downwards
(Fig. 11).
To remove, pull forward from the right hand
side and unhook.
Release the clips B (Fig. 12).
Leave to dry before refitting it.
Grid must be cleaned as well as the grease filter.

Carbon filter

This filter dissolves cooking odours.
It should be changed every 6-8 months in normal
use. Ask the technical assistance service or
manufacturing company for a new one.
The carbon filter must never be washed.
Dismounting the carbon filter:
a. Disconnect the hood from the electricity.
b. Remove the exhausting grid (Fig. 11).
c. Pull-out the tab (1).
d. Turn the filter in the counterclockwise direction
(2).

Attention

Failure to observe the rules for cleaning the
appliance and changing and cleaning the filters
may cause fires. Therefore, we recommend
observing these instructions.

Cleaning

To clean the outside of the hood use a cloth
moistened with denatured alcohol or neutral liquid
detergents. Never use products containing
abrasives.

Changing the lighting elements

Disconnect the hood from the electricity.
Open the grid (Fig. 11).
Replace the damaged part with one of equal
rating.
Fig. 11
B
Fig. 12
Fig. 13
35