Sinbo SMX 2735 Instrucciones De Uso página 8

KNOW YOUR MIXER
1. 5 speeds
2. Turbo function with safety device. Turbo function only works when the appliance is
operating
3. Eject button with safety device: blocked while the appliance is functioning
4. Steel dough hooks and beaters, chopper, stick blender, measuring cup included
5. Stand mixer with bowl
6. AC230V,50Hz 300W
STEPS TAKEN BEFORE USING THE MIXER
Before using the handle/stand mixer, be sure the power cord is unplugged from the
power outlet and the speed selector is in the OFF ("0") position.
1. Place the hand mixer to the stand, to separate the hand mixer
push forward. While pressing the head locking button (A) bend
the mixer head.
A
2. Affix the right mixing or beating apparatus. Dough hooks are
only used for mixing and kneading dough, mixer apparatus are
only used for mixing and beating eggs and similar materials.
Note: Beaters can be inserted in either socket, as the beaters are identical. For dough
hooks, the one with washer can only be inserted into the big socket and the other one
can only be inserted into small socket. The two dough hooks cannot be inserted reverse
sockets.
3. Place the larger bowl its cradle.
4. Lower the head and mixing / beater apparatus to the mixer bowl, to do this, while you
are holding the device at one hand, press the locking button with the other. When the
head reaches right position, a "click" sound will be heard.
USING YOUR MIXER
1. Ensure that the unit is at the OFF position, and then plug in the power source.
2. Turn the speed selector to your desired setting, there are 5 different speed settings.
The device will start to operate. When you press the turbo button, the speed will increase
25 %.
Caution: Do not place knife, metal spoon, fork or similar objects into the bowl while using
the device.
3. When using the device, the max operation period of each time shall not exceed 3
minutes and there should be minimum 1 minute rest time between two consecutive
cycles. When kneading yeast dough, it is suggested that the speed selector is adjusted
to a low speed first and then the speed should be increased to achieve the best results.
4. When mixing is completed, turn the speed selector to OFF position, unplug the cord
from power outlet.
5. Press the head locking button and bend the head of the mixer till it fixes in horizontal
position.
- 7 -