Extremis WALRUS Manual Del Usuario página 5

3
2
5. Now attach the arm rests to the frame, using 3 M8x20 bolts for each arm rest and an M8 flat washer on each bolt.
: make sure the holes match up, and then tighten all the bolts in the arm and back rests.
PLEASE NOTE
tighten the bolt at the front first
6. Place the seat cushion on the frame and fix it in place by attaching the Velcro straps to the two rods in the middle.
OPTIONAL
1. Open the cover of the back rest. Attach the blanket to
the back rest using the glass fibre rod (L = 985 mm)
included with the blanket.
1
1
, then the one at the back
2
and lastly the one in the middle
2. Drape the blanket over the sofa and add the cushion.
1
2 3
:
TIP
3
.
english 5