Brita Redi-Twist USS-301 Instrucciones De Instalación página 5

Note: Mount the filter system to a solid cabinet wall
or wall. If a solid surface is not available, use hollow-
wall anchor bolts or toggle bolts (not included) to
secure to the wall.
• Locate an easy access area to mount
the filter.
• Remove cap from system head.
• Measure and mark location of
mounting holes.
• Mount system head to wall of cabinet.
USS-301 installation instructions
direct connect to kitchen faucet
Attach Head to Inside
Step 1
of Cabinet Wall
materials and tools needed
safety
phillips
drill
1/8" drill bit
safety glasses
glasses
screwdriver
CAUTION
Mount to cabinet
in vertical position
4-6" FROM BOTTOM
INLET
tape measure
OUTLET
5
Version 1.0E