MAHLE Digital ADAS 2.0 Manual De Instrucciones página 21

Static camera calibration
Static camera calibration
1 Turn on the vehicle control panel
2 Press the "Play" icon on the scantool
to perform the diagnosis
3 Press "Adjustments" in the side menu
to perform the camera calibration
4 Select "Static calibration ..."
5 Press "Start"
6 Some conditions to be checked are
shown on the scantool display
Press the "Next" icon if the conditions
are met
7 The display then shows a message
indicating that the calibration is being
performed
When the calibration is completed,
8
a message indicating "Calibration
performed" is shown on the scantool
display and the calibration values are
displayed
21