MAHLE Digital ADAS 2.0 Manual De Instrucciones página 24

24
Digital ADAS 2.0
User manual
5 Turn on the R rangefinder and aim the
laser at the center of the radar mod-
ule. Perform zeroing if required by the
laser meter. Adjust the height of the
structure through the remote control
on the scantool
Then press the "Next" icon
6 Mount the clips on the front wheels:
6.1 place the clip on the rim;
6.2 turn the adjustment knob to cen-
ter it on the wheel hub;
6.3 then, level the reference posi-
tioned on the same clip
Press the "Next" icon
7 Turn on the L rangefinders and point
the laser at the respective targets, in
order to respect the distances indicat-
ed on the scantool Adjust the height
of the structure through the remote
control on the scantool
Note: The laser must be positioned
on the vertical white line present in
the reference, but not necessarily in
its center
8 Press the remote control on the
scantool until the structure automat-
ically positions itself at the correct
height
9 Bring the Digital ADAS 2.0 structure
to a certain height. Position the radar
mirror at an indicated value. Rotate
the mirror according to the indicated
value. Make the required adjustments
Press the "Next" icon
10 The scantool display shows the mes-
sage: "Setup completed. Press Play
to start "