MAHLE Digital ADAS 2.0 Manual De Instrucciones página 27

Static radar calibration
Static radar calibration
1 Turn on the vehicle control panel
2 Press the "Play" icon on the scantool
to perform the diagnosis
3 Press "Adjustments" in the side menu
to perform the camera calibration
4 Select "Static calibration ..."
5 Press "Start"
6 Some conditions to be checked are
shown on the scantool display
Press the "Next" icon if the conditions
are met
7 The display then shows how to tilt the
mirror
Adjust the mirror by turning the knob
Press the "Next" icon
A verification message is then shown
8
on the display
Press the "Next" icon
The first radar check is then per-
formed
9 Next, the display shows how to posi-
tion the mirror
Adjust the mirror by turning the knob
Press the "Next" icon
10 A verification message is then shown
on the display
Press the "Next" icon
The second radar check is then
performed
11 Next, the display shows how to posi-
tion the mirror
Adjust the mirror by turning the knob
Press the "Next" icon
27