Solar Panel - Westinghouse iGen1000s Manual Del Usuario

SOLAR CHARGING
The iGen1000s can be charged with universal solar panels (10-65V DC, 8A max) with a MC4
connector. When the input exceeds 65V, iGen1000s overload protection will be triggered. Excessive
voltage can damage the iGen1000s.
Note: Westinghouse will not provide repair services for any damage to the unit caused by the poor
quality or improper operation of the third-party solar panels, including during the warranty
period.
Connect a solar panel (not included) equipped with a MC4 connection to the supplied MC4 to XT60
conversion cable. Plug the XT60 cable into the unit as shown.

SOLAR PANEL

SOLAR SERIAL CHARGING
Connect 1 to 3 solar panels (do not connect more than 3) in series as shown to the MC4 port as
shown. Then, connect to the MC4 to XT60 conversion cable.
Charging port
XT60 Connector
SOLAR Panel
MC4
Adapter
Cable
MC4 to TX60
Cable included with Onan PS1000
MC4 Connector
Westinghouse Outdoor Power Equipment, LLC | 13
Charging Port
XT60 Connector
INPUT PORT
PANEL SOLAR -21.6V X3