Recycling; Notification Icons - Westinghouse iGen1000s Manual Del Usuario

RECYCLING

Dispose of the unit in hazardous material-specific recycling locations only after a complete
discharge (if possible). Batteries are hazardous chemicals. Strictly follow your local regulations
regarding battery disposal and recycling. Dispose of the unit immediately if it cannot be powered on
after over-discharging.
Always return your used electronic products, batteries, and packaging materials to dedicated
collection points to prevent uncontrolled waste disposal and promote the recycling of materials.

NOTIFICATION ICONS

The display screen uses the following icons and combined icons to indicate overload and
temperature conditions.
USB-A Overload Protection
USB-C High Temperature Protection
Product Overload
High Temperature Discharge-protection
High Temperature Recharge-protection
Low Temperature Recharging-protection
Low Temperature Discharge-protection
Overload Recharging-protection
Overload Discharging-protection
Icon Description
USB-A and OVERLOAD icons flash together.
Disconnect all electrical devices and wait 10
seconds before reconnecting.
USB-C and High-Temperature icons flash together.
Let unit cool before reconnecting.
Overload icon flashes. Unplug all the electrical
devices and restart the unit.
RECHARGING TIME, Exclamation and High-
temperature icons flash together. Occurs after
heavy battery use. Let the unit cool down before
recharging.
Exclamation and High-temperature icons flash
together. Charging can be resumed after the
battery has cooled.
RECHARGING TIME, Exclamation and Low-
temperature icons flash together. Place the unit
in a warmer location and wait for it to return to the
charging temperature range before recharging.
Exclamation and Low-Temperature icons flash
together. Place the unit in a warmer location and
wait for it to return to the charging temperature
range before recharging.
RECHARGING TIME, Exclamation and
OVERLOAD icons flash together. Unplug
charging cable, restart the unit, then reattach
charging cable. If light keeps flashing, contact
Westinghouse customer service toll-free at 1 (855)
944-3571.
Exclamation and OVERLOAD icons flash together.
Disconnect all devices, restart the unit. Make sure
the Power Station can supply enough continuous
(running) and peak (starting) watts for the items
you will power at the same time.
Westinghouse Outdoor Power Equipment, LLC | 15