Cleaning; Transportation And Storage - Westinghouse iGen1000s Manual Del Usuario

SOLAR SERIAL AND PARALLEL CHARGING
Connect up to two sets of solar panels in parallel to the MC4 port as shown. If you want to connect
six solar panels, put them into two sets of three solar panels connected in series, then connect the
two sets of solar panels in parallel (parallel cable sold separately). Connect the panels to the MC4
to XT60 conversion cable. Plug the XT60 cable into the unit as shown.

CLEANING

Only clean the surface of the unit using a dry, non-abrasive cloth. You can use cleaners designed for
mobile phones or computer screens. To ensure adequate cooling, vacuum the fan vents to remove
dust and debris.

TRANSPORTATION AND STORAGE

• Battery life may be reduced if not used for an extended period of time. Discharge the Power
Station to 30% battery life, then charge to 85% every 3 month to prolong battery life.
• DO NOT place the product near a heat source, such as a car in direct sunlight, a fire source, or
a heating stove.
• Store the product in a dry environment. DO NOT place the product where it may contact water
or high humidity.
• Make sure no small metal objects can fall on or around the product while in storage.
• Never transport a product with a battery power level higher than 30%.
• Never store the product in environments below -4°F (-20°C) or above 113°F (45°C).
14 | Westinghouse Outdoor Power Equipment, LLC