Westinghouse iGen1000s Manual Del Usuario página 16

Icon
Communication Failure between Main
Board and BMS
Battery Cells Failure
Communication Failure between Main
Board and AC
Inverter Output Overload
Inverter High Temperature Protection
Inverter Low Temperature Protection
Fan Blockage
Car Charger Overload
Car Charger High Temperature Protection
Communication Failure
16 | Westinghouse Outdoor Power Equipment, LLC
Description
Only the Exclamation icon is flashing. Restart unit.
If the light keeps flashing, contact Westinghouse
customer service toll-free at 1 (855) 944-3571.
The Exclamation icon is on. Try to restart the unit.
If the light keeps flashing, contact Westinghouse
customer service toll-free at 1 (855) 944-3571.
AC icon flashes. Restart the unit. If the icon keeps
flashing, contact Westinghouse customer service
toll-free at 1 (855) 944-3571.
AC and OVERLOAD icons flash together. Wait
10 seconds, turn AC Power ON/OFF. Make sure
the Power Station can supply enough continuous
(running) and peak (starting) watts for the items
you will power at the same time.
AC and High-temperature icons flash together. Let
the unit cool down.
The AC and Low-Temperature icons flash together.
Place the unit in a warmer location and wait for it
to return to operational temperature range.
AC and Fan icon flashes. Turn off the unit and
carefully clean and vacuum around vents on both
sides. Turn power ON. If icon keeps flashing,
contact Westinghouse customer service toll-free at
1 (855) 944-3571.
Car and OVERLOAD icons flash together. Restart
the unit.
Car and High-temperature icons flash together.
Occurs when temperature/XT60 Interface is
recharging in a High Temperatures. Wait for unit to
cool down.
Car icon flashes. Restart the unit. If the icon keeps
flashing, contact Westinghouse customer service
toll-free at 1 (855) 944-3571.