Cycle Guide - Maytag 3LMEDC100 Manual De Uso Y Cuidado

Secadora a gas o eléctrica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CYCLE GUIDE — AUTOMATIC DRY CYCLES
AUTOMATIC DRY - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Choose ENERGY PREFERRED cycle for optimal energy savings.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
TIMED DRY - Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Heavy or bulky items
Any load
Rubber, plastic, heat
sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High Heavy temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low Delicate to Medium Casual temperature setting may
be used for drying medium-weight items such as sheets,
blouses, dresses, underwear, permanent press fabrics, and
some knits.
6
Dryness Level:
Temperature /
Heavy
Medium / Casual
More Dry
Energy Preferred
Low / Delicate
Less Dry
Cycle:
Temperature:
High Heat
High
Freshen Up
Any
Air Fluff
No Heat
(duvetage à l'air)
Available
Fabric:
Options:
High / Heavy
End of Cycle
Signal
Available
Options:
End of Cycle
Signal
Use the Air Fluff (no heat) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Automatic cycles give the best drying
in the shortest time. Drying time varies
based on fabric type, load size, and
dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of
the temperature to select for a load, select
the lower setting rather than the higher
setting.
Cycle Details:
Completes drying if items are still damp.
Use low to medium temperature to smooth out
wrinkles, such as those found in clothes packed
in a suitcase or in items wrinkled from being left
in the dryer too long.
No heat drying.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

3lmedc300

Tabla de contenido