WATER INSTRUCTIONS
Your steam cleaner has been planned for use with normal tap water. In order to
very high, we recommend using 50% of normal water with 50% of distilled water.
WATER – A FEW SUGGESTIONS
1.
Immerse the litmus paper in a glass of water for one second
2.
Wait for the paper to dry and refer to the scale below.
Soft water
Medium hard water
Hard water
Very hard water
nation of tap and distilled water.
TEST FIRST, THEN CLEAN
Prior to cleaning, test the surfaces to be steam cleaned. We will not assume any
responsibility where damage is done due to not testing first.
DESCRIPTION OF THE STEAM CLEANER
1.
Main switch
3.
Steam control light
4.
Water level control light
5.
Electrical cord
7.
Carrying handle
9.
Wheels
-
04