Operation Of The Appliance; Automatic Stop; Operating The Hood - Beko BHCB63640B Manual Del Usuario

3

Operation of the appliance

3.1 Controlling the Appliance
KEY FUNCTION
A : Light On You may illuminate the cooking
/ Off
area by pressing this button. Re-
press the button to turn off the
lamp.
B : 1. Stage
Operates the appliance on 1st
Button speed. When you press this button
again to turn off the appliance, the
screen speed stage turns off.
C : 2. Stage
Operates the appliance on 2nd
Button
speed. When you press this button
again to turn off the appliance, the
screen speed stage turns off.
D : 3rd Stage Operates the appliance on 3rd
Button
speed. When you press this button
again to turn off the appliance, the
screen speed stage turns off.
3.2 Energy efficient usage
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.

3.3 Operating the hood

• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using low
speeds under normal conditions and high speeds
in cases of strong odours and intense vapour.
Cooker Hood / User Manual
• You can start your appliance by pressing on the
desired speed setting button. (B, C, D)
• You may illuminate the cooking area by pressing
the lamp (A).

3.4 Automatic stop

Your appliance has Automatic Stop feature, ena-
bling it to ventilate for a bit more and remove the
unwanted odours and vapour inside the environ-
ment and turn off automatically after the cooking
is done. To enable Automatic Stop feature, press
the any speed stage button (B, C, D) on the control
panel for longer than 2 seconds; the 15-minute
timer function shall be activated. When the au-
tomatic stop feature is active, pressing the same
speed button shall disable the automatic stop
function and the appliance's motor shall stop. This
feature is disables when you switch between dif-
ferent speed stages. If you want the appliance to
stop automatically, you need to enable the auto-
matic stop feature again.
3.5 Replacement of Lamp
MAX 3 W
(Figure 3)
Make the electrical connections of the appliance.
Your appliance uses 3W spot LED lamp. For re-
placing the lamps, push downwards on the holder
from its behind, turn it counter-clockwise, and take
it out downwards. Apply the above operation in re-
9 / EN