Garland ROLL & COMB 602 QG-V21 Manual De Instrucciones página 26

English
INDEX
1. Introduction
2. Security measures
3. Warning symbols
4. Machine symbols
5. Machine description
6. Start up instructions
7. Using the machine
8. Maintenance and service
9. Trouble shooting
10. Transport
11. Storage
12. Recycling or disposal of your machine
13. Warranty conditions
CE Declaration of conformity
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Ref.:GBASCAR601QGV21M0621V1
DATE OF PUBLICATION: 05/07/2021
DATE OF REVISION: 05/07/2021
1. INTRODUCTION
30 Thank you for choosing this Garland machine. We
are confident that you will appreciate the quality and
31 performance of this machine, which will facilitate your
task for a long period of time. Remember that this
36 machine has the most extensive and expert technical
assistance network which you can consult for the
36 maintenance, troubleshooting and purchase of spare
parts or accessories.
38
Warning! Read all safety warnings and
40 all instructions. The failure to observe all
warnings and instructions below can result in fire and/
44 or serious injury. Before using this machine, carefully
read the information in this manual on correct setup
47 and safe techniques.
52 Brush only artificial grass meadows. Do not use
this machine for any other purpose. For example: do
54 not use this machine to brush natural grass, asphalt
floors, cement or other materials, carpets, tarps, etc.
54 Using this machine for operations other than those
intended may cause dangerous situations.
54
Save all warnings and instructions for future
55
reference. If sold in the future, remember to give this
manual to the new owner.
56
The expression "Switch in open position" means that
the switch is switched OFF and "Switch in closed
position" means that the switch is turned ON.
Remember that the machine operator is responsible
for the damages and accidents caused to other people
or things.
The manufacturer will not be liable in any way for
damages caused by improper or incorrect use of this
machine.
26/100