Skil 2302 Manual Del Usuario página 7

e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.,
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fi re when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fi re.
c) When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fi re.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
SAFETY INSTRUCTIONS FOR CORDLESS DRILL/
DRIVERS
• Avoid damage that can be caused by screws, nails and
other elements in your workpiece; remove them before
you start working
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the charger
(chargers with a rating of 230V or 240V can also be
connected to a 220V supply)
• In case of electrical or mechanical malfunction,
immediately switch off the tool or unplug charger from
power source
• SKIL can assure fl awless functioning of the tool only
when original accessories are used
• Use only accessories with an allowable speed matching
at least the highest no-load speed of the tool
• This tool should not be used by people under the age of
16 years
All manuals and user guides at all-guides.com
• Secure the workpiece (a workpiece clamped with
• Hold the power tool only by the insulated gripping
• Use suitable detectors to find hidden utility lines or
• Do not work materials containing asbestos
• Dust from material such as paint containing lead, some
• Certain kinds of dust are classifi ed as carcinogenic
• Follow the dust-related national requirements for the
• Ensure that switch B 2 is in the middle (locking)
CHARGING/BATTERIES
• Charge battery only with the charger that is supplied
• Do not touch the contacts in the charger
• Do not expose tool/charger/battery to rain
• Store tool/charger/battery in locations where
• Batteries will explode when disposed of in fi re, so do
• Do not use charger when damaged; take it to one of the
• Do not use charger when cord or plug is damaged; cord
• Do not use battery when damaged; it should be
• Do not disassemble charger or battery
• Do not attempt to recharge non-rechargeable batteries
• Explanation of symbols on charger/battery
7
clamping devices or in a vice is held more securely than
by hand)
surfaces when performing an operation where the
accessory may contact hidden wiring or its own
power cord (contact with a "live" wire will also make
exposed metal parts of the power tool "live" and shock
the operator)
call the local utility company for assistance (contact
with electric lines can lead to fi re or electrical shock;
damaging a gas line can result in an explosion;
penetrating a water pipe will cause property damage or
an electrical shock)
(asbestos is considered carcinogenic)
wood species, minerals and metal may be harmful
(contact with or inhalation of the dust may cause
allergic reactions and/or respiratory diseases to the
operator or bystanders); wear a dust mask and work
with a dust extraction device when connectable
(such as oak and beech dust) especially in conjunction
with additives for wood conditioning; wear a dust
mask and work with a dust extraction device when
connectable
materials you want to work with
position before making any adjustments or changing
accessories as well as when carrying or storing the tool
with the tool
temperature will not exceed 40°C or drop below 0°C
not burn battery for any reason
offi cially registered SKIL Service Stations for a safety
check
or plug should be replaced immediately at one of the
offi cially registered SKIL Service Stations
replaced immediately
with the charger
3 Read the instruction manual before use
4 Only use the charger indoors
5 Double insulation (no earth wire required)